Description

 Product Package:

1 PCS x 3/4Axis MACH3 Motion Card USB 2000KHz Interface board

Product Description

 

 

Features:

• Support all versions of Mach3.
• Can only run under Windows operating system.
• USB does not need to install drivers; the Windows version is plug and play.
• Fully support USB hot plug, monitor the USB connection status at any time, when Mach3 is working, the USB cable can be unplugged and then plugged in, and the connection can be normal.
• Support up to 6-axis linkage, including jogging 6-axis linkage. (Depending on the model, the number of supported axes is different)
• With 2000KHz pulse output, support servo/step.
• With status indicator, it can prompt USB connection and Mach3 connection. During operation, various states can be seen at a glance.
• With 16 input IO, 8 output IO ports
• All IO ports are fully isolated, with strong anti-interference and stable performance
• Support spindle PWM speed control output; support spindle pulse + direction output; support spindle 0 to 10V analog voltage speed control output.
• 184x110x30 mm, aluminum shell, shielding interference, stable and reliable.

 

 

Input signal interface

• There are 16 input signals, and the low-level input is valid, and the input current is 5 mA.
• Support 6-24V signal input.
• Each signal is defined as follows:
• X-HOME: X-axis origin signal input, corresponding to MACH3 software input IO port: P1.0
• Y-HOME: Y-axis origin signal input, corresponding to MACH3 software input IO port: P1.1
• Z-HOME: Z-axis origin signal input, corresponding to MACH3 software input IO port: P1.2
• A-HOME: A-axis origin signal input, corresponding to MACH3 software input IO port: P1.3
• PROBE: tool setting signal input, corresponding to MACH3 software input IO port: P1.4
• IN5-IN15: input port, MACH3 software input IO port is: P1.5-P1.15

Spindle inverter interface

• MKX supports spindle speed adjustment, inverter interface, or PWM interface.
• MKX spindle interface speed control output, supports 2 ways: 0-10V analog voltage output; or 0-5V analog voltage output; or 5V PWM signal output.
  When the analog voltage output is used to adjust the speed, a DC voltage needs to be input to the board, and the value of the DC voltage determines the maximum voltage value of the analog voltage output; for example, the DC voltage input: 10V, the analog voltage output is 0-10V Variety.

External power interface

The MKX control card requires an external 6-24V DC power supply to power the board.

Output port

MKX provides 8 expansion outputs.

The output port is active low level.

Drive current 50mA; support up to 24V signal.

Spindle control:

OUT0: The corresponding MACH3 output port is configured as P1.0
Extended output port 1-7: OUT1-7: The corresponding MACH3 output port configuration is: P1.1-P1.7

Shaft drive interface

MKX provides maximum support for 6-axis drive,
MKX control card supports stepper and servo drive, adopts pulse + direction drive mode, the drive mode is common anode mode, the maximum frequency supported pulse output is 400KHZ, the drive capacity is 20mA current, and the internal photoelectric isolation output is used.